Thomson Filter Vials No multiple step transfers needed. Pre-slit caps for all our filter vials for sale, with the exception of the low evaporation caps, ensure a no-hassle, clean aliquot withdrawal. No more breakage of expensive needles or coring problems on the HPLC or Mass Spectrometer.
13 mm Puradisc Syringe Filters (sterile) Membrane* Without tube tip With tube tip Nylon PVDF PES PVDF Quantity/pack Pore size (µm) 0.1 6786-1301 50 0.2 6786-1302 6791-1302 6780-1302 6778-1302 50 0.45 6791-1304 6780-1304 50 * PES = Polyethersulfone; PVDF = Polyvinylidene di uoride 25 mm Puradisc Syringe Filters Membrane* Nonsterile Sterile
Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa.
Thomson Syringe Filters have standard Luer-lok/Luer connections and are either 0.22 or 0.45μm porosities in 4, 13, 25 and 30mm diameters. They are available in a wide selection of membranes, including Nylon, PTFE and PVDF, supporting all common sample preparation applications.
Applications for Thomson Filter Vials include all sample types to be analyzed by HPLC, UHPLC, LC-MS, and GC-MS. Max Fill Vol. 450 µL Dead Vol. 120 µL Standard Filter Vials (120μL Dead Volume) Thomson Standard Filter Vials (patented) can be used for samples containing less than 10% solid particulates.
Thomson's filtration products are engineered and optimized to increase the efficiency of sample preparation without compromising the results. Thomson eXtreme/FV® Filter Vials offer tiered filtration, and are designed to speed up sample prep and analysis on particulate laden samples.
innovative product for small volume sample preparation. This syringe-less filter unit is made for volumes up to 400 µl. It combines filter and storage vial in an all-in-one solution. Significant time and cost savings are obtained as multiple steps and consumables are cut out of the sample preparation process.
Faster & better way of sample preparation: Mini-UniPrep Syringeless filters by Whatman® for your HPLC lab. Great selection of filters at Analytics Shop.
Thomson SINGLE StEP Standard Filter Vials. Recommended for samples containing less than 10% solid particulates. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers.
Toggle Press for eXtreme Filter Vials. 25861. ea. Filter Vial Press, Multi-Use: 8 Positions for 30 mL Filter Vials & 48 Position for Autosampler Ready Filter Vials. Select. Deselect. Catalog # 25861.
Captiva filter vials remove particulates from your sample and are ideal for simple mechanical filtration. Filtering samples before analysis can extend column lifetime, decrease instrument downtime, and improve sample integrity. Captiva filter vials reduce the steps in your gas chromatography (GC) or high-performance liquid chromatography (HPLC
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
What Are Poly- and Perfluorylalkyl Substances (PFAS)? PFAS and The Regulatory Landscape Analytical Methods For Determining PFAS In Water Samples Filtration Media and PFAS Contamination Testing Millex ® Syringe Filters in PFAS Workflows Testing Millipore ® Polypropylene Membrane Filters in PFAS Workflows Sample Filtration in PFAS Testing
Filter Vials provide pre-analytical sample filtration that improves your signal-to-noise ratio and extends column life while minimizing plastic waste Plates designed for sample preparation and storage applications, or both small scale pilot projects and high throughput sample analysis Empty Columns
A good choice for HPLC sample filtration when performing chromatography protein analysis. RC Regenerated Cellulose (RC) is a hydrophilic, solvent resistant, low protein binding membrane. Ideal for removing particulates from HPLC samples prior to injection. Extractables with water are less than 1%.
