25 mm Standard Acrodisc Syringe Filters. Broad line of 25 mm syringe filters for HPLC/UHHPLC applications. Ideal for sample volumes of ≤ 100 mL. Available with a range of membrane chemistries and pore sizes to ensure the best compatibility with your sample and application requirements. Shop Now 25 mm Syringe Filters.
Recommended for samples containing less than 10% solid particulates, these standard filter vials are constructed using PTFE or PES for long-lasting durability.Available in a variety of filter media, syringeless filters allow you to process sample loads in a fraction of the time, providing a quick, economical, and environmentally conservative way to filter samples prior to HPLC analysis. These
Thomson SINGLE StEP Standard Filter Vials Recommended for samples containing less than 10% solid particulates. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers.
2/10 Technology Dr. Arundel, Queensland 4214. Australia. Products: All Products Filter Vials Well Plates Flasks Plasmid+. +61 7 5594 0299 genesearch.com.au +61 7 5594 0562 info@genesearch.com.au. Genesearch Pty Ltd.
Thomson Filter Plates in both 24- and 96-well configurations are ideal for biological as well as analytical sample preparation. We also offer a high efficiency Vacuum Manifold that connects directly to your house vacuum. Key Features Long neck drip funnel assures minimal risk of cross-contamination.
Thomson's filter vial line is a proven indispensable tool for sample prep and analysis for all types of HPLC, GC, LC-MS, GC-MS and lateral flow analyses. Whether testing pharmaceuticals, toxicology or other areas, filter vials allow you to go from unfiltered samples to filtered samples in 15 seconds. More About Filter Vials.
Sample Preparation, Purification & storage Filter Vials provide pre-analytical sample filtration that improves your signal-to-noise ratio and extends column life while minimizing plastic waste Plates designed for sample preparation and storage applications, or both small scale pilot projects and high throughput sample analysis Empty Columns
compounds separated from the matrix. Thomson eXtreme|FV® offer multi-layer filtration for viscous samples and samples containing up to 30% particulates. eXtreme|FV® allows for compounds to be separated from the matrix, which results in both a higher signal-to-noise ratio and peaks that are more differentiated.
Filtering samples in-vial with a 3-step process (deposit sample & dilute, press plunger to filter, place in HPLC). Even with a seemingly homogenous sample, filtering with a Thomson Filter Vial is fast and eliminates HPLC downtime. Low Evap|Filter Vial specifications Features & Benefits Key Features
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
0.45 µm PES 0.2 µm PES 0.45 µm PVDF 0.2 µm PVDF 0.45 µm PTFE 0.2 µm PTFE 0.45 µm Nylon 0.2 µm Nylon Figure 1: The patented design of Thomson SINGLE StEP® filter vials allows you to perform sample clean-up in the same vial that goes into your autosampler. 32 mm 12 mm Dead volume 120 L Fill line volume 450 L Set needle depth to 5 mm from
Thomson SINGLE StEP eXtreme Filter Vials Provide multilayer filtration for viscous samples and samples containing up to 30% solid particulates. Allow compounds to be separated from matrix, resulting in both higher signal-to-noise ratios and more differentiated peaks.
Thomson's filter vial line is a proven indispensable tool for sample prep and analysis for all types of HPLC, GC, LC-MS, GC-MS and lateral flow analyses. Whether testing pharmaceuticals, toxicology or other areas, filter vials allow you to go from unfiltered samples to filtered samples in 15 seconds.
Step 1: Determine the nature of your sample. Identifying the right lab filter is a 3-step process. Begin selecting your lab filter by determining the nature of your sample with the guidelines below: Aqueous: wwPTFE, Nylon, PVDF, and Supor PES. Non Polar: CR/PTFE, wwPTFE, and MS PTFE.
Each case of Acrodisc, Syringe Filter, PVDF contains 100 filters, with a pore size of 0.45 µm and a diameter of 13 mm, with a hold-up volume of >30 mL. For larger volumes, Acrodisc, Syringe Filter, PVDF, 13 mm, 0.45 µm, Protein, 1000/pk is also available. Pall Life Sciences produces all Acrodisc filters in strict adherence with cGMPs and
