Wholesales 0.45um syringeless filters price restek Home » News » Filter Vials filter vials exporter thomson Low evaporation 0.22um syringeless filters restek hplc filter vials. EXW price 0.45um hplc filter vials on stock restek Certified PTFE filter vials distributor separa-Chromatography GVS™ SEPARA™ 32 mm Syringeless Filter Vial
FV-1045LE - Filter Vial, 0.45um Nylon,Low Evap cap, 100/p $325.00 SKU: FV-1045LE Overview Specifications The Low Evaporation Cap eliminates the pre-slit in the cap membrane allowing the vial to hold sample evaporation to a rate of <.4% over a 24 hour period. This is comparable to standard screw capvials.
Thomson's filter vial line is a proven indispensable tool for sample prep and analysis for all types of HPLC, GC, LC-MS, GC-MS and lateral flow analyses. Whether testing pharmaceuticals, toxicology or other areas, filter vials allow you to go from unfiltered samples to filtered samples in 15 seconds.
Thomson Standard Filter Vials can be used for samples containing less than 10% solid particulates. The filter vial consists of two parts: a filter vial shell and a plunger which includes a single layer filter on one end and a vial cap on the other end.
Whatman® 10463052 Syringe Filter, 30mm, SPARTAN, 0.45um, Syringe Filter, 30mm Diameter, SPARTAN – HPLC Certified, 0.45um Pore Size, Regenerated Cellulose/ Polypropylene, Female Luer Lock/ Ma Send Inquiry
In two steps. Deposit 450μL of sample into shell vial. Insert plunger into the outer shell & press. 15 seconds. In two steps and 15 seconds you can have a safe and secure sample for analysis. If you need to filter more than one sample the use of a Toggle Press (up to 5) or Multi-Use Press (up to 48) can be used.
Color-coded caps allow easy identification of 0.2 or 0.45 μm membranes in PVDF, PTFE, PES, or Nylon. Standard|Filter Vials are designed to speed up sample prep and minimize transfer steps. Available in a variety of membranes and pore sizes. Simply add sample and diluent, press, and it is ready for analysis. This process minimizes sample loss.
Thomson nano|Filter Vials offer a low dead volume, allowing filtration with as little as 10 µl of sample with enough remaining filtrate to make a 2 µl injection.Available in a variety of filter media, syringeless filters allow you to process sample loads in a fraction of the time, providing a quick, economical, and environmentally conservative way to filter samples prior to HPLC analysis.
Restek | Chromatographic Specialties Inc.Filter Vials, 0.2um PVDF w/pre-slit cap, Thomson SINGLE StEP, Red Cap: 100-- Add to Cart: RK25896 Filter Vials, 0.45um PVDF w/pre-slit cap Mob: 8618057059123 market@aijirenvial.com
Red PTFE (Hydrophilic) Syringe Filters, 0.45 µm, 25 mm PerkinElmer All our syringe filters are HPLC certified. Housing Material: Polypropylene Effective Filtration Area (cm2): 4.08 Pore Size (µm): 0.45 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating
Membranes Designed for the StringentRequirements of Mobile Phase Filtration. Membranes are identical in composition and quality to those used in Pall’s HPLC-certified Acrodisc ® syringe filters. HPLC certification assures that the filters will not add artifacts to your analysis. GH Polypro membrane is the best choice for filtering mobile phases.
0.45 µm PES 0.2 µm PES 0.45 µm PVDF 0.2 µm PVDF 0.45 µm PTFE 0.2 µm PTFE 0.45 µm Nylon 0.2 µm Nylon Figure 1: The patented design of Thomson SINGLE StEP® filter vials allows you to perform sample clean-up in the same vial that goes into your autosampler. 32 mm 12 mm Dead volume 120 L Fill line volume 450 L Set needle depth to 5 mm from
Restek | Chromatographic Specialties Inc.Filter Vials, 0.45um Nylon w/pre-slit cap, Thomson SINGLE StEP, Pink Cap 100-- Add to Cart RK25893 Filter Vials, 0.2um PTFE w/pre-slit cap Whatsapp:8618057059123
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
Manufacturer: Thomson FV-2045LE - Filter Vial, Low Evap, 0.45um PTFE, 100/pack $325.00 SKU: FV-2045LE Overview Specifications The Low Evaporation Cap eliminates the pre-slit in the cap membrane allowing the vial to hold sample evaporation to a rate of <.4% over a 24 hour period. This is comparable to standard screw capvials.
