Supplier: Thomson Instrument Thomson nano|Filter Vials offer a low dead volume, allowing filtration with as little as 10 µl of sample with enough remaining filtrate to make a 2 µl injection. In vial filtration with minimal sample loss, 10 µl sample for a 2 µl injection Minimize sample loss by eliminating multiple transfers
Shop Thomson Instrument Company eXtreme|Filter Vial, PES 0.2um, Pre-Slit Septum, Grey Cap | CS200 at Fishersci.com
24 Well Plate 10.4mL square well round bottom with. by Thomson Instrument Company. $247.00 / CS. 931568. Optimum Growth 2.8L Flask Sterile. by Thomson Instrument Company. $169.00 / CS. 931114. Standard Filter Vial PVDF 0.2 m with pre slit sept.
Captiva filter vials reduce the steps in your gas chromatography (GC) or high-performance liquid chromatography (HPLC) workflow. Just fill, cover, and plunge! Filter vials are a fast, economical, and environmentally conscience way to filter samples. The single, convenient and easy-to-use unit replaces the combination of syringe filters
Thomson SINGLE StEP® Filter Vials - Restek Color-coded caps allow easy identification of 0.2 µm or 0.45 µm membranes in PVDF, PTFE, PES, or nylon. • Pre-slit PTFE/silicone caps help eliminate broken
Standard|Filter Vials, Thomson Instrument Company. Recommended for samples containing less than 10% solid particulates. Color-coded caps allow easy identification of 0.2 or 0.45 μm membranes in PVDF, PTFE, PES, or Nylon. Standard|Filter Vials are designed to speed up sample prep and minimize transfer steps. Available in a variety of membranes and pore sizes.
Thomson SINGLE StEP Standard Filter Vials - Restek Minimize sample loss by eliminating multiple transfers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon.
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial. Versatility Built Into Filter Vials
Thomson nano|Filter Vial® offer a very low dead volume, allowing one to filter as little as 10μL of sample with enough remaining filtrate to make a 2μL injection. Applications include all low volume samples: analysis of enzymes, peptides, DNA, RNA, synthesis reaction intermediates, finished products, saliva. nano|Filter Vial® specifications.
Thomson Nano Filter Vials 0.2µm & 0.45µm Filter vials in range of materials including PVDF, PTFE, Nylon and PES Designed to speed up sample prep and analysis on particulate laden samples Wide variety of applications ranging from life sciences, drug discovery, monitoring and analysis Minimises steps and loss of sample
Thomson Standard SINGLE StEP Filter Vials 0.2µm & 0.45µm Filter vials in range of materials including PVDF, PTFE, Nylon and PES A simple replacement for HPLC vials, HPLC caps, syringes, needles, and syringe filters Designed to speed up sample prep and analysis Minimises steps and loss of sample Pre-slit caps available
Thomson SINGLE StEP® Filter Vials Sample filtration that’s economical, eco-friendly, and fast! 0.45 µm PES 0.2 µm PES 0.45 µm PVDF 0.2 µm PVDF 0.45 µm PTFE 0.2 µm PTFE 0.45 µm Nylon 0.2 µm Nylon Figure 1: The patented design of Thomson SINGLE StEP® filter vials allows you to perform sample clean-
Corning™ PES Syringe Filters - Fisher Sci. Dec 31, 2022 · Pore size and membrane type is printed on every syringe filter. Sterile filters are individually blister-wrapped in cases of 50, nonsterile in cases of 50. Compliance. Manufactured to ISO 9002 and GMP standards, and 100% integrity tested. Choice™ PES (Polyethersulfone) Syringe Filters
Thomson SINGLE StEP Standard Filter Vials, Restek Catalog Number: (10118-326) Supplier: Restek Description: Recommended for samples containing less than 10% solid particulates, these standard filter vials are constructed using PTFE or PES for long-lasting du Retrieving Pack Standard|Filter Vials, Thomson Instrument Company
Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa.
