PTFE/Synthetic Red Rubber Septa: (PTFE/RR) -30 +110 -22 +230 PTFE/ High Perfomance Red Rubber Septa -40 +110 -40 +230 PTFE/Silicone Septa: (T/S) -60 +200 -76 +392 PTFE/Silicone/PTFE Septa: (T/S/T) * -60 +200 -76 +392 PTFE Septa * -200 +250 -328 +482 Polyethylene (PE) * -50 +80 -58 +176 Polypropylene (PP) * 0 +121 32 +250
The Aijiren Technologies silver screw cap with PTFE/butyl septa has a solid aluminum construction that offers added strength and prevents leaks, sold as 1000 per pack. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures. Compare this item.
Vial septa are available in a variety of materials. Septa, tan PTFE/silicone (diam. x thickness 8 mm x 1.5 mm) are sized to fit screw top vials. They are suitable for use with most organics (until pierced) and are not recommended for use with chlorosilanes. Compare this item.
Septum Selection Guide Septa for use with general chromatography vials PTFE/Red Rubber Septa: (PTFE/RR) PTFE/Red Rubber septa are the most popular and economical choice for general gas chromatography applications. These septa are used primarily for routine analysis in gas chromatography with FID, TCD and FPD detectors.
PTFE/silicone septa are always best. What force is required to penetrate the septum? Generally, silicone septa are more easily pierced than red rubber or butyl septa. For thicker, hard-to-pierce septa, a small gauge (23 gauge) needle may be required, or a stronger S-needle can be used. Preslit septa are the best option for
Blue aluminum, clear PTFE/red rubber septa 100/pk Green aluminum, clear PTFE/red rubber septa 100/pk 5181-1216 Red aluminum, clear PTFE/red rubber septa 100/pk 5181-1217 Silver aluminum, PTFE/silicone/PTFE septa 100/pk Silver aluminum, PTFE/silicone septa 100/pk Silver aluminum, PTFE/butyl rubber septa 500/pk 5061-3370
Molded Septa are manufactured from high quality, low bleed material that uses the same exclusive LB-2 rubber formulation chromatographers are accustomed to using. Design. Solid Disc. Type. Septa. For Use With (Equipment) Low Bleed GC-MS Columns. Temperature (Metric) Max. 350°C.
The septa are conditioned to provide the lowest level of chromatographic extractables. If you are looking for the ultimate performance from your methods while maintaining the highest levels of sample security and integrity, our Performance Level 3 products will meet your needs. Select the products with three waves.
The septum is provided with a thin 0.005” PTFE layer laminated to highly pure silicone, and slit through the center for easier needle penetration and to release the vacuum that forms when a large volume of sample is withdrawn from a vial.
Excellent compressibility and resealability; Withstands multiple injections; Resists coring; Highly chemically resistant PTFE-faced silicone rubber maintains integrity of contents
Contents Choosing the right septa When choosing proper septa, there are many factors to consider: type of solvent or sample, slit or non-slit design, and reseal ability. These factors ultimately lead to material makeup of the septa.
Polytetrafluoroethylene ( PTFE) is a synthetic fluoropolymer of tetrafluoroethylene and is a PFAS that has numerous applications. The commonly known brand name of PTFE-based composition is Teflon by Chemours, [3] a spin-off from DuPont, which originally discovered the compound in 1938. [3]
Ideal for use with reactive and corrosive chemicals. The melting point of PTFE 1 is 600°K (327°C / 620°F) Low temperature: maintains high strength, toughness and self-lubrication as low as 5°K (-268°C /-450°F) and good flexibility at 194°K (-79°C / -110°F) NOT compatible with certain alkali metals and fluorinating agents such as xenon
The 1.5mL 9mm Short Thread Vial ND9 offers numerous features that make it a reliable and flexible storage option for sample material. Compact size, compatibility with various analytical techniques, user-friendly design, high-grade materials, secure sealing options for sample visibility, and cost-effective packaging options are among its outstanding characteristics.
Mar 31, 2022 · PTFE/rubber septa. PTFE/Red Rubber Septa have: 1. strong solvent resistance, 2. resealing properties, 3. and are coring resistant. When you need a PTFE barrier, they are the most cost-effective option. Until the initial puncture, the PTFE face increases solvent compatibility. Temperature stability chart for PTFE/rubber septa:
