PerkinElmer Injector Septa, low bleed over a wide range of inlet temperatures -100 to 350 C. Easier needle penetration and high puncture tolerance make this septum ideal for autosamplers. This septum is already conditioned and ready to use.
Aijiren 2ml 11mm Snap Ring HPLC Vials has a standard scale and writing area for easy filling and identification. 2ml 11mm Sanp Ring HPLC vial can be matched with most autosamplers on the market, such as Aijiren, Thermo Fisher, Shimadzu and other well-known brands. 1.5mL 11mm Snap Ring Autosampler Vial ND11.
11 mm Pre-Assembled Clear Polyethylene Snap Cap with Pre-Slit PTFE/Silicone (Red/White) Septa, 100/pk. For sealing sample vials for temperatures up to 210°C. Recommend for storage and for multiple injection use. Item (s) added to cart.
Clear Glass 12 x 32mm Snap Neck Qsert Vial, with Cap and PTFE Septum, 300 µL Volume, 100/pkg 파트넘버: 186001127 Buy Now Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, 2
Part Number: 186002649. Waters offers a selection of cap, septum, and assembled cap/septum for various vial sizes. The range of septum material is limited to PTFE, silicone / PTFE, and polyethylene septumless caps. Black, 12 x 32mm Snap Neck Cap and PTFE/silicone Septum, 100/pkg.
Find Snap Ring Vial and related products for scientific research at MilliporeSigma US EN Applications Products Services Support Products Building Blocks Explorer Genes Papers Technical Documents Site Content Shipping Ships Today (4) Product Category
Vials from Ohio Valley Specialty Company. Robotic, Crimp Top, Snap-Lok, Screw Cap, Autosampler, EPA Series 2000 & 3000, Glass Serum Vials, Micro-Product. Address: 115 Industry Road Marietta, Ohio 45750 Toll-free Phone: 1-800-729-6872 Phone: 1-740-373
11mm Autosampler Snap-It Caps. Eliminate the need for crimping or de-capping tools with Thermo Scientific™ 11mm Wide Opening Snap-It Caps and Septa.They are easy to apply and easy to remove and fully compatible with all Snap-It vials. The enlarged open area allows for needle penetration across the entire vial opening.
Aijiren manufacturer’s 11mm Snap top cap with Ptfe silicone septum is used for 2ml sample bottles. The neck of the vial has two horizontal lines, which is convenient for snapping the cap. The snap cap is very convenient to seal, but it is not suitable for storing
Pre-Slit found in: 11mm Snap Top Caps , BND Red Scr Cap PreSlit PTFE/Si septa100, vial clr scrw pre-slit PTFE/sil 100pk, 13mm Septa For Screw Thread Vials,..
2.0 mL, 11 mm GC Snap Ring Cap With Septum • Snaps on any crimp-style vial. • Save money! Use this snap cap when you don’t need to crimp. Description Septa Material 100-pk. 1,000-pk. Polypropylene Snap Ring Cap w/Liner PTFE, 10 mil 21729 21730
2ml snap HPLC vials are less likely to be damaged when removing the cap because there is a lot of glass used in the vial neck. Snap-neck HPLC vials are compatible with either crimps or snap vial devices. You don’t need any special tools to remove the cap.
Vial closure size = 11mm. Approx total capacity = 475uL. Recommended usable volume = 300uL. Residual volume = less than 2uL. Snap-It snap cap closures and aluminum seals can also be used. Excellent economical alternative to glass vials. 100/pk.
.jpg)
Perkin Elmer Ordering Information - 2mL Snap Vials, 12 x 32mm, 11mm Opening Snap Vials, Caps and Inserts * Please note that 50µL glass inserts actually hold a larger volume PART NO. (100pk) DESCRIPTION VT011SM-1232 2mL Clear Glass Snap Vial
Polypropylene Snap Cap Vial Component Kits (with PTFE/Silicone/PTFE Septa) MicroLiter. Component Kits consist of a clear clamshell outer pack with one pack of the specified Class 10,000 Clean Room packed vials and one pack of the snap caps with septa installed. Compare this item.
