Product Filter. 4ml Clear screw top vial 15 x 45mm. Unit/Measure. PK/1000 Part No. VI-03-15-01. £148.00. Find out more Add. 4ml Amber screw top vial 15 x
MicroLiter, a WHEATON Brand, offers proven autosampler vials and consumables for the chromatographer. Meeting the requirements of customers’ demands, MicroLiter offers cleaned vials designed to allow more reliable transfer of samples from the prep lab to
Crimp Top Seals for Chromatography Vials are available in Polypropylene or Aluminum. Polypropylene seals decap smoothly and easily and holds the septa firmly in place. They permit an airtight seal by hand or use a standard crimping tool. Polypropylene construction means no more sharp edges.
2009/3/17 · In order to avoid these risks, La-Pha-Pack has developped the so-called pre-cut septa. Here the Silicone carrier material is cut through in Y-form, however, the PTFElamination remains unhurt. As the Silicone part of the septa represents 95 per cent of the complete septa thickness, the needle can easily penetrate through the Y-slit for most of the septa’s thickness.
Pre-slit septa are easier to pierce with thin gauge needles. Limited warranty period: Subject to all warranty requirements and exclusions set out in our Terms and Conditions of Sale, this product is warranted from the date we ship the product and for ninety (90) days thereafter. Disclaimer to internal research use restriction: Any restrictions on
Description. Description. Prevent septa push through and over- and under-tightening. With Advanced Vial Closure System (AVCS) technology built into 9mm Autosampler Vial Screw Caps and Septa you will get an optimal, consistent seal every time. With just one turn, they offer easy-on, easy-off convenience, and are a cost effective alternative to caps
2 mL Screw Top Vials and Screw Caps | AijirenThe associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber Tel: +8618057059123 Email:market@aijirenvial.com
Screw-Thread Vials Septa Pre-slit Caps and Septa Pre-assembled 8x1,5mm temperature resistant -60 C-200’C. 8-425 Thread Screw Cap, PTFE/Silicone,0.040’’. Absence of elastomer layer reduces potential for contamination. Process without glue was used
Preassembled Closure and Septa. Check up to five results to perform an action. Choose the preassembled caps with septa best suited for your application. The patented Top Hat™ septa and closure was designed to provide a positive physical lock to
.jpg)
Synonym: Certified CD™ Vial (Center Draining) Kit, 9 mm thread with cap/septa, unassembled. 23187-U. volume 1.2 mL, clear glass vial, thread for 9 mm, O.D. × H × I.D. 12 mm ×
Silicone rubber septa High quality, silicone rubber laminated to PTFE. Use when excellent resealing qualities are a must. Septum resists coring and is recommended when multiple injections are required. Preferred septa for use in liquid chromatography
Top Vials and 100 preassembled Black Caps with PTFE/Silicone Pre-slit Septa together in an environmentally clean, re-sealable clamshell pack. Volume: 2 mL Size: 12 x 32 mm I.D.: 10 mm Finish: Screw Top with Closure Kit Description: Amber glass vial PTFE/Silicone Pre-slit Septa with Black Cap
Shop All Chromatography Autosampler Vial and Closure Save time during sample preparation and reduce the risk of contamination using Thermo Scientific™ 9mm Clear Vial Convenience Kits. Each kit includes 100 clear glass vials pre-assembled with 100 screw thread caps and septa.
Chromatography. Autosampler Vials Crimpers and Decappers. Autosampler Vials, Caps, and Closures. Chromatography and Mass Spectrometry Reagents. Chromatography Columns and Cartridges. Chromatography Syringes. Chromatography Water. Gases and Gas Accessories. Paper Chromatography
Pre-slit PTFE/Silicone Septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics. The septum is provided with a thin 0.005” PTFE layer laminated to highly
