Basic recommendations · Thick / blunt HPLC needles require soft Silicone /PTFE closures, either slit or unslit. · Snap ring closures N 11 are recommended for HPLC
Waters. Acquity UPLC. •. Alliance, Alliance 2690/2695/2790/2795 Septa. Closed caps with PTFE seals or Open caps with silicone/PTFE seals.
Part Number: B7995-24 ; Pack Size: 100-pk ; Product Type: Septum Only ; Product Size: 24 mm ; Product Size, Pack of 100.
Closure Type, Screw Neck ; Dimensions, 12 x 32mm ; Format, Vial ; Septa Type, Cap and Preslit PTFE/Silicone Septa ; Units in Package, 100/pkg.
Closures, closures and septa · 8-425 CLOSED Cap polypropylene./PTFE, foam urethane liner · 8-425 Screw Cap blue for 2ml screw thread vial narrow opening,
.jpg)
Vials, Closures And Inserts ; HPLC / GC Compatible – WatersTM, Aijiren technologies, Shimadzu, Perkin Elmer, Thermo, Jasco etc. ; Vials Quality – USP type 1 class
All the seals, caps, septa and inserts will be located on the corresponding vial pages. GUIDELINES FOR AUTOSAMPLER VIAL Type of Vial Finish and Closures.
closures for your samples. Butyl rubber/PTFE septa are used with ketones and acids, and where silicone-containing septa do not perform well. Both types of
2.0 mL Clear vials, with PTFE/red rubber cap, unassembled closures and septa. ... PTFE/Silicone Septum. Polypropylene Cap,. PTFE/Red Rubber. Septum.
Septum Material, : PTFE/Silicone. Cap Material, : Polypropylene. Cap Type, : Open Top. Type, : Class 3, Precleaned and Certified. GPI Finish, : 24-414 mm.
make PTFE/silicone septa suitable for all types of chromatographic applications. single piece caps or as 0.01" thick disks inserted into closures. The.
Jan 2, 2006 To explore the origin of the loss, a set of 3-mL aliquots of pure water sealed in 10-mL headspace vials with crimp-cap closures (MicroLiter ...
Manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, 12x32mm vials with a pre-crimped aluminum seal having a PTFE/Rubber Septum.
Manufacturer, Waters. category, Lids and closures. type, screw cap. material septum, PTFE/Silicone. closure diameter, ND12
Septa Material, Bonded PTFE/Silicone Slit Septa. Cap Material, Polypropylene. Closure Type, Open Top. Graduated Spot, Yes. Material, Borosilicate Glass.
