Aluminum Crimp Seals with Prefitted Septa for 8mm Crimp Top Vials Flanged caps are preferred for Shimadzu, Hitachi and Tosoh autosamplers.
Results 1 - 30 of 34 Vial crimp seals for SPME, 11 mm · SU860095. gold seal, magnetic (with 5 mm center hole), red PTFE/silicone/red PTFE septum, septum diam. × ...
Waters recommends pre-slit PTFE/silicone septa, for venting and accurate sample Crimp caps squeeze the septum between the vial's rim and the crimped ...
Shimadzu now offer a complete range of Headspace Vial Kits for GC in both Crimp There is a wide variety of cap and septa types including magnetic screw ...
Crimp Neck Vials and Aluminium Crimp Seals ND11 Crimp Caps ND11) ... Silicone /. PTFE Septa both sided. PTFE laminated liners required. PTFE/.
Cap and Septa Only, No Vial. Cap: 20mm Magnetic Bimetallic Crimp Cap & Septa, Red in color, Septa: 8mm center hole, Silicone/PTFE, 45° shore A, 3.0mm,
Package of 10mL clear headspace flat bottom vials with 20mm aluminum crimp caps (silver in color) and Silicone/PTFE Septa. Cap: 20mm silver aluminum crimp
Potential Problems Caused by Using Incorrect Vial/Cap/Septum: hole in the PTFE septum layer than a properly crimped seal. Undercrimping can result in ...
Vials, 20mm Aluminum Crimp Cap, Plain center hole, Silicone/PTFE, 100/pk. Shimadzu Part Number: 220-97331-06 ... Cap and Septa Only, No Vial.
However, substandard vials, caps, and septa can lead to sample loss, Based on our decades of chromatography experience, crimp-cap vials tend to be best ...
Use with autosamplers that require 12 x 32mm screw top or crimp top vials. VIAL DESCRIPTION. QTY. CAT. NO. PRICE. POLYPROPYLENE CAP, PTFE/SILICONE SEPTUM.
Headspace vial kit with 20mL (75.5 x 22.5mm) crimp neck, clear glass, flat-bottom vials and red magnetic caps with PTFE/silicone septa. Flat-bottom vials
Glass Vials 10 ml and 20 ml Screw Neck Content: 100 pcs. Cap for SPME applications, 2 mm septum thickness at the crimp border; thinned penetration area ...
Pre-slit septa are highly recommended for Shimadzu,. Hitachi, and other autosamplers with thin gauge needles. Bonded caps: feature a PTFE/Silicone septum
Magnetic Seals w/Septa Material: (20 mm, preassembled) 5 mm hole is compatible with the following systems: Carlo Erba HS500/HS800, CTC 500,
