If a GC septum decomposes under these conditions, septum bleed can cause baseline disruption and ghost peaks in the GC chromatogram. GC septa include both disc-shaped products and Shimadzu plugs. GC septa from SSP are precision-molded from ultra-low bleed silicone rubber.
Select the sample vial and sample rack to suit the analyzed sample. All three vial types have a well sealed septum that can be easily replaced with the screw cap. The sampling needle is optimized for sample extraction from highly-sealed vials and for sparging. Changing analysis conditions or adding sample vials during analysis is simple.
13-425 Shimadzu White Screw Cap with rib for 4.0mL Vial 100/pk ¥1,300 606050-13 221-34266-92 13-425 Red PTFE/White Silicone Septa 100/pk ¥3,700 ※All prices are indicated excluding tax. To the Vial Product List Product Guide Crusher Vial ACE GLASS
This patented, chemically inert cap is a true combination of the septum and the plastic lid at the molecular level to avoid excessive evaporation and maintain proper sealing of the vial. This is the end of the introduction of 8mm PTFE septa for 8-425 Shimadzu vials
Aijiren 13-425 glass vials with screw cap are customized products based on your experimental requirements for vial types, writing areas, logos and other individual parameters. Aijiren 13-425 glass vials with screw cap is fully compatible with SHIMADZU
CAP, BUTYL/PTFE SEPTUM, 120C MAX [HS-20] (100/PK) HS-10/HS-20 CAP+SEPTUM, BUTYL/PTFE, 120C MAX, 100/PKG.. HS-10/HS-20 CAP+SEPTUM,
Benefit of pre-slit Septum Septum can be pre-slit or not and must be selected by evaluating a few method criteria. Shimadzu often experiences that every application is different, therefore multiple sealing options exist. For vials, different types of septum material are
Narrow-mouth septa bottles are available in clear or amber Type III glass equipped with a 0.045 in. thick blue PTFE/silicone septa in an open-top 24-414 polypropylene cap. The I-CHEM molded-in septa retainer ring holds the septa securely in place without bonding to the cap, so septa can be removed
Thermogreen® LB-2 Septa is suitable for the following applications: To minimize extraction onto or loss of analytes off the solid phase microextraction (SPME) fiber from the vial during analysis by GC-MS. Thermo-resistant septa is used in GC instrument to avoid carrier gas leaks, extraneous peaks and phthalate contamination.
Cap incl. septum. (cap incl. septum P/N) 961-10010-07. 10 ml glass, clear; 18 mm precision screw thread; round bottom; 46.0 x 22.5 mm. 961-10020-06. magnetic cap 8 mm centre hole; silicone blue transparent/PTFE white; UltraClean; 1.3 mm thick; 45° shore A. 961-10030-03. 961-10010-10.
with different vial cap types. Figure 4. Amitriptyline peak area change using the fixed loop injector with different vial cap types. Trend plots of the peak areas for naphthalene and amitriptyline with these caps on the fixed loop injector are given in Figure 3 and 4-70.0
Septum purge Capillary column Split resistance Vent Trap Carrier gas 150k Pa 2mL/min 3mL/min 49mL/min 2mL/min 53mL/min Septum purge Split resistance Vent Trap Carrier gas 150k a 50mL/min 1~2 minutes Sample injection port Sample needle Sample
Select the sample vial and sample rack to suit the analyzed sample. All three vial types have a well sealed septum that can be easily replaced with the screw cap. The sampling needle is optimized for sample extraction from highly-sealed vials and for sparging. Changing analysis conditions or adding sample vials during analysis is simple.
Glass Vials 4.0 ml Screw Neck Content: 100 pcs. / pack Kits P/N Vial (vial P/N) Cap incl. septum (cap incl. septum P/N) 961-10010-05 4.0 ml glass, clear with
Cap/Septa part number 220-97331-14 Clear, Round Bottom 220-97331-09 Magnetic Cap, Silicone (Transparent Blue)/PTFE (White) 220-97331-04 220-97331-16 Clear, Round Bottom 220-97331-10 Magnetic Cap, Silicone (Transparent Blue)/PTFE (White)
