Vial choices include: Crimp Top, Snap Top, and Screw Top vials with a selection of closures. Refer to the Autosampler Compatibility Table on pages 12-13 to determine which vials, closures, and inserts will work on your specific autosampler unit.
Fisherbrand Robotic Screw Top Autosampler Vial Closures, Closure with PTFE/Silicone Septa For use with Fisherbrand™ Robotic Screw Top Autosampler Vials (cat. no. 033918). $24.45 - $42.60
Crimp Cap to suit vials with 12mm closure. 11mm diameter with pre-inserted silicon / teflon® septum. 100 pack. Please see below for compatible vials. EXP®2 TI-LOK 10-32 Hand-Tight Standard Waters-style Port Capillary Tubing Adapter £ 125.00 EXP®2 TI-LOK
Septa for 13-425 Screw-Thread Vials, Thermo Scientific. Supplier: Thermo Scientific. Description: White virgin PTFE. 10mil thick. Fits open-top screw cap (66030-392) for 4ml screw-thread autosampler vial (66030-380). Recommended for Electron Capture detectors and mass spectrometers or where any contamination may interfere.
2-ml Vial Septa found in: RAM Clear 2.0mL Large Opening Vial and PTFE/Silicone Septa Lined Bonded Closure Kits, Certified PTFE/Silicone Septa 2.0mL with.. 5mL x 0. 63mm outer diameter syringe 2mL clear sample vials (144) 2mL amber sample vials (100) blue crimp caps with septa (100) green crimp caps with septa (100) red crimp caps with septa (100) septa for waste/wash vials (100) crimper - 11mm
Vial Kit, 2 ml, 32 H x 12 mm OD, Clear, Glass Vial, 9 mm, Blue, Screw Thread Closure, Red PTFE/White Silicone Septum, Assembled, with Marking Spot, 100 Clear Glass Vials Pre-assembled with 100 Screw Thread Caps and Septa. Vial Kit, 2 ml, 32 H x 12 mm OD, Clear, Glass Vial, 9 mm, Blue, S More SECO Part #: C5000-192W.
About product and suppliers: 1,343 ptfe/silicon septa for sample vial products are offered for sale by suppliers on Alibaba.com, of which seals accounts for 1%. A wide variety of ptfe/silicon septa for sample vial options are available to you, such as ptfe, silicone.
Septa together in an environmentally clean, re-sealable clamshell pack. Volume: 2 mL Size: 12 x 32 mm I.D.: 10 mm Finish: Screw Top with Closure Kit Description:Clear glass vial PTFE/Silicone Pre-slit Septa with Black Cap This cap and septa is also
Clear and amber sample vials are pre-cleaned and certified for volatile organic analysis. Vials are fully assembled with green polypropylene closure and 0.125” PTFE silicone septa. Made from Type 1 borosilicate glass. Certificate of analysis is included in each case.
The septum you choose for your autosampler vial can impact sample evaporation, sample security, needle bending and blockages, and instrument down time. Don’t let the complexities of septa selection slow you down. Use the simple online Thermo Scientific.
Autosampler compatibility Page 14-15 Vial matching chart Page 16-17 16407_ASC - VWR Autosampler Vials.indd 3 12/21/2018 7:44:47 PM VWR® AUTOSAMPLER VIALS, INSERTS, AND CLOSURES
closure and SureStop vial design. (See illustration below) • Greater septa choice (bonded caps very limited in septa offering). • AVCS closures and SureStop vials seal more securely than bonded caps. • AVCS closures and SureStop vials are considerably less
.jpg)
Anaqua autosampler vials improve your laboratory, by reducing costs and saving time. The cleanest on the market, these products considerably reduce the risk of test results compromised by ghost [peaks, damages needles or dislodged septa, decreasing failures and sample reruns. Anaqua autsamlper vials are manufactured with borosilicate glass
Shimadzu now offer standard 2mL (1.5mL) vials designed for mutli vendors autosampler. Shimadzu Vial Packs Part Number Description Colour 226-50512-00 Vial Kit , Standard, 2ml Clear glass, 9mm, includes vial, bonded Si/PTFE cap and septa, pk 100 Clear 226
Standard autosampler vials with cap and septa, 12 x 32 mm, 8-425 thread Product Number Product Description SDS Z291706 volume 2 mL, pre-assembled convenience pack, clear glass vial, PTFE/silicone septa
