Axygen™ AxyMatsTM septa mat is designed to be used on ABI sequencer. Made of research-grade silicone, they can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused. Septa Mat for ABI Multi-Capillary Sequencing Instrument; For use with 96 PCR microplates
A wide range of vials, closures, and accessory products designed for generalized and specific scientific applications. Various product formats, dimensions, and material compositions are available. Includes autosampler vials, cryogenic storage vials, and serum vials. Thermo Fisher Scientific is dedicated to improving the human condition through
Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of applications. Manufacturer: Thermo Scientific™ C401340. View more versions of this product. Catalog No. 03-340-10B. $77.20 / Pack of 100. Qty Check Availability.
Tuf-bond Septa (9711D10 to D45) Thickness: 100 mils Of silicone rubber with PTFE facing 10 mils thick Septa of butyl rubber, silicone rubber or rubber-laminated PTFE are available on special order. Septum diameter indicated in listings. Related Products: Screw Cap With Septum. Compare this item.
the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics. The septum is provided with a
Stoppers, also known as bungs, are used to give an airtight seal to laboratory flasks and test tubes by fitting tightly inside the neck of the container and preventing material from spilling. Stoppers can be made of glass, cork, rubber, or silicone. They are typically designed with a conical shape, but straight, flanged, and tapered options are
A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.
Chemglass. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware® glassware components. Septa are made of silicone rubber with one side having a RED PTFE face, while the opposite side has an ultrathin covering of polypropylene to prevent needle coring when penetrating septa. Compare this item.
Septa chemical compatibility. Solvent PTFE PTFE/Silicone PTFE/Silicone/PTFE* PTFE/Red rubber Fluoroelastomer PTFE/Butyl Acetonitrile Hydrocarbons (hexane, heptane, methane) Methanol Benzene THF Toluene DMF DMSO Ether Chlorinated solvents (methylene chloride) Alcohols (ethanol) Acetic acid Acetone Phenol Cyclohexane
For use with 13-425 threaded caps or 13mm Snap/Crimp Caps, Thermo Scientific™ 13mm Septa are available in PTFE/ Red Rubber, PTFE/Silicone or Red PTFE/White Silicone/Red PTFE to suit a variety of applications. PTFE disk septa are chemically inert. PFTE/red rubber septa are economical for many GC applications.
Septa. Septa are available in a variety of materials and thicknesses. PTFE Natural Rubber are moderately priced seals for GC and HPLC with good chemical properties. They are ideal for multiple injections due to high resealability, but not as easy to penetrate as PTFE/RR. PTFE/High Performance Rubber is a highly pure synthetic red rubber septum
Home Products Labware Septa Septa A wide range of serrated and non-serrated septa, and sleeve stoppers are available for use as temporary closures for glassware joints, tubes, bottles, NMR tubes, ampules, and cannulation techniques in air-sensitive chemistry.
Thermo Scientific™ Hypo-Vial Septa are ideal to use with borosilicate glass sample bottles for heating and autoclaving. Closure for 50 and 125mL glass sample bottles. Hycar and silicone plug-type septa and flat PTFE/Silicone laminated discs (sold separately) Fits 6-125mL Hypo-Vial sample storage vials. Enable syringe-needle access to vial
Ideally, caps should form an airtight seal and be inert. Caps may come with a silicone or polytetrafluoroethylene (PTFE) septum, which creates a tight seal. Needles can pierce the septum because the elasticity of the material allows it to reclose. Septa are commonly made of PTFE and silicone. There are several benefits of silicone septa.
B 9-425 Compatible Screw Vial. High recovery vial Autosampling vial Sample vial. PRF.V0204.019 Clear glass 1.5ml Flat base high recovery vial 12mm x 32mm. PRF.V0204.026 Amber glass 1.5ml Flat base high recovery vial 12mm x 32mm. – Amber – White. PRF.V0204.001 12mm x 32mm. PRF.V0204.009 2ml Flat base vial with writing area 12mm x 32mm.
