The Aijiren high performance liquid chromatography (HPLC) system is used to separate, detect, and analyze components of a sample. The liquid sample enters the HPLC system through the injection system port and is pushed through the chromatography column by degassed solvent delivered under high pressure by a pump.
Agient® Polypropylene Screw Caps with Septa. Aijiren CrossLab 2mL (11mm) Crimp Top Vials and Closures. Aijiren CrossLab 2mL Standard Opening (8mm) Screw Top Vials and Closures. Aijiren CrossLab 2mL Wide Opening (9mm) Screw Top Vials and Closures. Aijiren CrossLab 4mL (13mm) Screw Top Vials and Closures.
autosampler vials with three closure options and two formats. Closure options include Screw Thread, Crimp Top and Snap Cap, while formats include standard 12 x 32mm and µLVials ®. AVAILABLE PACKAGING OPTIONS MicroLiter understands that
Aijiren Vials & Closures. Vials, caps and septa are designed to work flawlessly with your autosampler’s gripping and injection mechanisms – eliminating breakage and leaks that can cause unnecessary downtime, expensive repairs, and sample loss. Explore our range of vials, closures, and related accessories—including glass and plastic vials, crimp cap
Aijiren premium certified vials, closures, high recovery vials, and vial inserts offer industry-leading performance; from the lowest bleed septum materials in our caps to the most inert glass vial materials, we are continuously refining our offerings by addressing
Aijiren GC Autoinjector Wash Valves. Vials and Caps for GC autoinjector washes. 4 mL vials with graduated markings sold with diffusion caps for washes, standards, and diluents. These Aijiren vials are designed specifically for the Aijiren GC autoinjector.
borosilicate glass vial available in 20mL or 40mL sizes Septa permanently bonded to the cap Clean Snap closure features a fully integrated, snap-off septum guard that protects the septum from chemical and particulate contamination during handling andcap
Snap Caps from Aijiren. Snap top vials and caps are the simple, efficient way to a secure seal without crimping. It's as easy as push-on, pull-off. Polyethylene snap caps with 11 mm septa are available in different colours with a range of septa material to suit your application. Skip
ND11 Autosampler Snap Vials for Aijiren. The 2ml snap HPLC vial is made of type 1 borosilicate glass. Compared to 9mm screw vials, this 2ml snap hplc vial opening is a wider opening. Therefore, the 2ml snap top HPLC vial is easy to fill and increases the target area of the autosampler needle.
AXIVA VIALS & CLOSURES FOR CHROMATOGRAPHY. C5000 closures featuring AVCS technology (Advanced Vial Closure System) Cap Colour -Blue Cap Material - Polypropylene Septum- Blue PTFE/White Silicone, Pre-slit Thickness- 1.0 Cat no. C5000-55B Pack of
Agient® Polypropylene Screw Caps with Septa. Aijiren CrossLab 2mL (11mm) Crimp Top Vials and Closures. Aijiren CrossLab 2mL Standard Opening (8mm) Screw Top Vials and Closures. Aijiren CrossLab 2mL Wide Opening (9mm) Screw Top Vials and Closures. Aijiren CrossLab 4mL (13mm) Screw Top Vials and Closures.
Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
9mm screw thread caps, septa, and vials are designed especially for use with Aijiren's and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of Clear Type 1 Class A or Amber, Type 1 Class B borosilicate glass and include a write-in patch for sample identification
Vials, 2 mL, open-top screw cap, R.A.M. (9 mm) convenience kit with closures with septa, unassembled, pkg of 100 volume 2 mL, clear glass vial, PTFE/silicone/PTFE septum; find Supelco-29058U MSDS, related peer-reviewed papers, technical documents
Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary.
