Therefore, this product can be used with confidence, with no concern for ghost peaks originating from the vial. Wide-Mouthed Vial, with Preset Septum and Cap This product is designed so that the corners of the bottom of the vial interior can be reached by inserting a 100 μL scale micropipette tip obliquely, which increases the ease of use when inserting and retrieving samples.
OFN Standard in competitor’s vial, S/N = 10.81 OFN Standard in Shimadzu vial, S/N = 1616.08 TwoTypes of Septa Therst fi and most common septum is one consisting of a silicone top layer and a PTFE bottom layer. Theecond septum s is a silicone top
1.5 ml Kits, Vials and Caps. 1.5 ml standard vials and kits for LC/LC-MS and GC/GC-MS. Screw, crimp, snap ring vials and caps.
Nylon syringe filter into an HPLC vial. Secure the vial with a septum and cap. Results and Discussion Six levels of calibration standards, ranging from 0.5 to 80 mg/L, and three Quality Control (QC) standards at 2.5 mg/L, 25 mg/L and 60 mg/L were prepared.
.jpg)
Borosilicate glass (low impurity Type I Class A) with snap-on cap and pre-inserted PTFE/silicone septum. The snap cap style is ideal for high volume labs that require fast and easy sample preparation. Vial size is 12 x 32 mm with no writing patch. 100 vials and caps per pack. Use with any LC or GC autosampler rack for 12 x 32mm 1.5mL/2.0mL vials.
Shimadzu Hplc 2ml Vial Hplc Screw Thread Tubular Glass Shimadzu HPLC Autosampler 1.5ml 2ml Clear Vial. US $3.00-$7.00/ Pack. 1.0 Packs (Min Order) 7 YRS Zhejiang Aijiren Technologies Co., Ltd.
These chemically inert polyethylene caps are an economical choice for most routine HPLC applications but have low sealing property. Snap caps have a large open area allowing easy needle penetration across the entire vial opening. Aluminum crimp caps can also be used to seal snap-it vials
Autosampler Vial, Hplc Vial, PTFE Silicone Septa with Cap Crimp headspace vial widely used in Headspace and gas chromatography mass spectrometry analysis. Shimadzu Scientific US White PTFE/white Silicone septa, 20mm crimp-top aluminum cap, 10mm
12 x 32mm. 15 x 45mm. 15 x 75mm. Vial Closure Type. Crimp. Screw Neck. Snap Neck. QuanRecovery Vials and Plates with MaxPeak HPS Vials and plates to reduce non-specific binding in LC-MS bioanalysis, increasing sensitivity and repeatability. Autosampler ready formats for small sample volumes.
1.5ml vial brown glass with cap and septa kit 100 Details 980-04986 1.5ml vial with diaphragm cap (septum less for MS appl.) cap and septa kit 100 Details 980-08337 1.5ml screw vial with label Caps must be ordered separately 1000 Details 980-08338 1000
TORAST-H Micro-vial with 0.15 ml Clear glass with 9 mm screw neck wide open Open bottom With label and filling lines 32.0 x 11.6 mm Cap including septum, consisting of: Black PP-Cap 9-425 screw thread septum silicone/PTFE 100 pcs per box
of a screw cap vial with the integrity of a crimp vial, I-D vials have write-on patches graduated at 0.5, 1.0 and 1.5 ml. Also compatible with Perkin-Elmer, Shimadzu and Varian GC and LC autosamplers and Waters, Hitachi and Beckman LC autosamplers.
The septum is press-fit inside the cap without any bonding agents, which could potentially contaminate samples. It also prevents the needle from pushing the septum into the vial. A pre-slit version is also available. Low Adsorption Glass Shimadzu Low and Extra
11mm Clear Snap Cap, with Natural Rubber/PTFE Septa Standard GC Septa 60 1 100 Order 60180A-RC11ST1 11mm Clear Snap Cap, Red Silicone/Clear PTFE Septa Standard HPLC Septa 60 1 100 Order 60180A-RC11STS1 11mm Clear Snap Cap, Red 60 1
