HPLC vial septa closure for amber vial

injection methods. PTFE septa are rarely used for GC applications. Polyethylene (PE) Septa and Integral Molded Closures Chemically resistant polyethylene septa are usually molded into single-piece caps. The surface for needle penetration is 0.01" thick, allowing for use with most HPLC autosamplers. Polyethylene septa are not resealable and are

It’s easy to think of vials as simple, inexpensive components that don’t affect your results. However, substandard vials, caps, and septa can lead to sample loss, contamination, and damaged autosampler needles. Aijiren understands that vials are a critical part of your analytical workflow—no less important than the column or the instrument.

HPLC: When processing samples in batches of less than 50 use vials as there is little advantage using a 96-well plate as the plate capacity would not be fully utilized. HPLC/UHPLC: Plates are most useful when utilizing a high sample throughput for sample preparation with automated sample handling.

volume 2 mL, amber glass vial, thread for 10-425, pkg of 100 ea. Expand. Hide. 27085-U. volume 2 mL, amber glass vial (with marking spot), thread for 8-425, pkg of 1000 ea. Expand. Hide. 27115-U. volume 4 mL, amber glass vial, thread for 13-425, pkg of 100 ea.

Our precleaned, Type 1 borosilicate clear or amber glass vials are washed in non-phosphate detergent, rinsed three times with tap water, and rinsed with ASTM Type-1 organic-free water to remove detergent. Post cleaning, vials are assembled with PTFE/silicone septa and open-top polypropylene caps. VOA (EPA) Vials

*Product Description: Cap with septa is an essential co [] 15-425 screw vial; 24-400 screw vial; Purge and Trap/TOC Sample vial

Vials. Vials are available in a variety of styles. Find autosampler vials, vial caps and closures, and vial inserts for chromatography with snap, screw, or crimp-top closures, with and without septa. Autosampler vials come in convenient pre-packaged sets.

The associated 9 mm vial screw cap comes with your choice of septa constructed from either PTFE/silicone, PTFE/silicone/PTFE or PTFE/natural red rubber. Our screw vials and vial screw caps are designed for both HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels

Vial inserts are used to reduce the capacity of the vial to accommodate smaller samples. Typically 150 to 400µL in volume, they may be made of glass, plastic, or a combination of materials. Closure options include those with and without septa, snap caps, screw caps, and crimp top caps.

Designed to accommodate nearly all chromatography autosamplers fitted for 12 x 32cm vial trays, the C5000 series closure effectively eliminates septa push-through and significantly enhances productivity and flexibility in the laboratory. Related Products: Target Dp Vials Compare this item 13-425 Closures for 15x45mm Screw Thread Vials

Antibodies & Protein Biology Antibody Production & Purification; Electrophoresis, Western Blotting and ELISA

Waters Corporation

Screw Vial Convenience Kit, 2mL amber glass vial, open top PP cap, PTFE/silicone septum Thermo Scientific™ Screw Vial Convenience Kit, 2mL amber glass vial, open top PP cap, PTFE/silicone septum Catalog number: B7990-1A Related applications: Industrial Chromatography Technical Support Customer Service

Features of Target DP 9mm Vial Closures (included in kits): Septa push through nearly eliminated due to improved interior geometry without the need for bonding Increased sealing capability AVCS provides the freedom to select the best septum for your instrument and applications Cost

Chromatography vials are containers used to transport your sample matrix to the instrument prior to injection. Aijiren offers a broad range of chromatography vials in a variety of volumes, material compositions, and closure types to meet the specific needs of a wide range of applications.